remote start not working check engine light on

On the newer GM vehicles that have the remote start function if there is a check engine light related to the emissions system or many other trouble code set in the computer system it will disable the remote start feature. Just go to a stereo shop that installs remote starters and they can bypass your factory remote starter and you will just have to use your new remote starter and it doesnt care if a check engine light is on or not.

Why Is My Check Engine Light On Autozone

Did not get a check eng light before but for some reason I did this time.

. Sign up for FREE. Then shuts off and wont let me do it. The remote engine start remote engine start and automatic starter.

This might help you too. Gmc Acadia Remote Start Not WorkingThe problem is that after she got a chech engine light on the remote starter stopped working ans as soon as the check engine light is cleared the remote start wo The battery is under a cover on the passenger back seat floor board. Car started with key Check engine light was on all other lights normal all else seemed normal car ran fine transmission shifted OK cruise worked.

I then tried to use my key fob and that didnt work either. My engine light came on a few days ago. What causes remote start to stop working.

Correcting the check engine light and clearing the code will allow the remote starter to operate. The remote start feature will be enabled. Remote start wont work if the check engine light is on or any doors are ajar.

From buying research to owner support join 15 MILLION GM Truck Enthusiasts every. 1 hour later i was walking to my car pressed the remote start i could hear the usual little whine and click you hear before it starts and then nothing. So now that will not work.

Remote Start not workingcheck engine light. In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors Chevrolet and GMC branded pickups crossovers and SUVs. The remote start feature will be disabled.

What i have found is that it starts for less than a second then shuts off. My check engine light is on and My remote start wont. The codes can be the reason the remote start is not working.

So yesterday I was leaving the gym and I tried to use onstar to start my car. In order to avoid an accidently starting the engine when service is necessary the engine should never be started by mistake. About 100 feet away from the vehicle you can operate it.

The remote start will not work if another system is causing the lock out for the remote start to be active. Press the customization button until REMOTE START appears on the DIC display. Assuming it was a gas cap issue i tightened up the cap and left.

Regardless the check engine light hard to start inspection is the best way to diagnose this problem at your location. As i was pulling into my driveway my engine light came on. Remote Start not working check engine light on.

It turns out that I had 2 OBD codes in memory and the check engine light was off. Are the 2 related. I noticed that the remote eng start did not work thought it was strange and before I could read the code I assume it was for the MAF since it was the only electrical thing I disconnected the light went away and remote start worked again.

Scan for fault codes and fix accordingly. The other day the check engine light comes on I check the overhead monitor and the only thing it says is oil change needed which I dont need an oil change for 3000 more miles. In the possession of the remote you can start the CR-V.

It has worked for me before anyways it got denied. This morning went to start car with remote it did not work locked car seemed to operator normal push remote start. After that I gave up and got in and started the car to notice the engine light was on.

My remote start would not start car. The remote start not functioning is a safeguard similar to the open hood override to prevent the vehicle from starting. I would recommend having the computer diagnosed and the Check Engine Light reset after any repairs are completed as needed.

I would hit the lock button then the start button twice and then the lights would flash twice. Put key in ignition and turn to on position push key fob to onoff positen for about 30 seconds this should reset systemadrian Posted on Jun 27 2010. Turns out the truck is designed not to remote start of the engine light is on.

If there are lights illuminated on the Check Engine Light or Malfunction Indicator Lamp MIL the remote start doesnt work. If your check engine light is illuminated the remote start will not function on many vehicles. Then the check engine light can be cancelled with the scanner and I would then expect the remote start to.

Unloose gas caps on the other hand can obscure some MIL. Afterwards recheck the remote start for operation. Something remote start worked for a second and then truck turned off.

Its possible that the issue is with your remote starter itself with a battery being worn out or perhaps a security code has been triggered. Check engine light stayed on as well as the squigle tire light. When home I turn car off and waited 5 minuets.

Press the setreset button once to access the settings for this feature. There are three functions available on the CR-V. If you have any codes in memory or an active light it disables the remote startHope that helps someone.

I learned on this forum that the remote start wont work when a check engine light is on. The remote start on this vehicle will not work if the check engine light is onYou will have to have the codes checked and repaired in for the system to workYou should also check to see if you are still under the factory warrantyIt is 3 years and 36k milesIf you are over this then you are not under warrantyHope this helpsGood luck. Couldnt use the remote start again.

Its going in Monday to get serviced. These remote start systems are designed not allow starting when there is a code set in the computer and or the check engine light on. Then press the customization button to scroll through the following settings.

Since the check engine light came onmy remote start Factory installed will fire my truck up but only run for about 10sec. Posted by McNally on February 27 2022.

4 Step Guide On How To Disable Check Engine Light Permanently Remove Check Engine Light Fuse Engineering Auto Body Repair Auto Repair Shop